Chain Halsband | Kettenhalsband | Einfarbig | Custom
CHAIN Halsband – Edelstahl. Echt. Ehrlich.
Kettenhalsband ist nicht gleich Kettenhalsband.
Viele nutzen einfachen Stahl – der kann rosten, sich verbiegen oder im schlimmsten Fall brechen.
Und trotzdem wird oft ein hoher Preis verlangt – für ein Produkt, das nicht hält, was es verspricht.
Beim CHAIN Halsband setzen wir auf das, was wirklich zählt: massiven, rostfreien Edelstahl.
Robust. Sicher. Langlebig.
Und weil wir bei Sicherheit keine halben Sachen machen, kommt unser CHAIN Halsband mit einem Sicherheitskarabiner aus Edelstahl.
Dieser lässt sich verschrauben – so kann er sich nicht versehentlich öffnen.
Normale Karabiner können bei falscher Nutzung aufspringen oder sich im schlimmsten Fall in den Hundehals bohren. Mit unserem System bist du auf der sicheren Seite.
⚠️ Wichtig zur Nutzung:
Das CHAIN Halsband ist kein Alltags-Halsband und nicht geeignet für Hunde, die an der Leine ziehen. Durch seine schmale, feste Form verteilt sich der Druck nicht wie bei einem breiten Leder- oder BIoThanehalsband.
Es ist ideal als stilvolles Accessoire oder perfekt für den Hundesport ( Nach FCI Standart und Prüfungskonform) oder für Hunde, die zu 110 % leinenführig sind.
💬 Was macht das CHAIN Halsband besonders?
🟡 Edelstahl statt einfachem Stahl
🟡 Höhere Bruchlast – belastbar & langlebig (mehr dazu im FAQ)
🟡 Rostfrei und unempfindlich gegenüber Nässe
🟡 Sicherheitskarabiner aus Edelstahl – schraubbar, nicht aufspringend
🟡 Glieder gleiten sanft durchs Fell – kein Ziepen, kein Knoten
🟡 Handverarbeitet – schlicht im Look, stark in der Wirkung
Bitte beachte die FAQ´s
🔔 Hinweis: Bei der Pulverbeschichtung können an Stellen wie zwischen den Gliedern kleine Farbpartikel fehlen. Dies beeinträchtigt die Funktion nicht und führt mit der Zeit zu einem leichten Used Look – dies ist normal.
This product is made especially for you, according to your wishes.
Processing time 2-4 weeks.
The power collars are made of high-quality stainless steel.
Breaking loads:
3mm short link: 280kg
3mm long link: 250kg
4mm long link: 600kg
Our safety carabiner: 410kg
The pulling load of almost every dog is about 4 times its own body weight.
----
The chains are available in different widths and are powder-coated especially for you.
There's also a safety carabiner with a high breaking strength and safety lock. This original is only available from us, as we hold the patent for chains with this carabiner.
The chain collars are FCI standard and long-link. The short-link chains do NOT comply with the test.
----
Please only loop a leash next to the carabiner, never into the carabiner.
Please only use a leash if your furry friend is very good at walking on a leash and does not pull.
We're not saying this because the breaking load can't withstand it, but because with thin collars, the pressure can't be distributed evenly and over a wide area when pulled. This poses a risk of injury to the dog.
---
Suspension points
Due to the coating process, hanging points at the ends AND between the links are completely normal and unavoidable. Wherever there are contact points, no powder can penetrate, and therefore no paint can penetrate.
wear
Friction, whether between individual links or even from a leash, naturally causes wear. This is also completely normal and unavoidable. Depending on how intensively you use the chain, wear can occur more quickly.
Color indication for wear
Due to the different pigment composition of each color, metallic and neon colors wear off faster, especially between the links, than standard colors. This may also apply to very light standard colors. This is normal and unavoidable.
Care
Chain collars don't require intensive care. However, it's still worth cleaning your chain regularly with clean water, especially if a lot of dirt gets stuck between the links or after swimming in the sea. Additional dirt particles can lead to increased friction and therefore faster wear.
The power collars are made of high-quality stainless steel.
Breaking loads:
3mm short link: 280kg
3mm long link: 250kg
4mm long link: 600kg
Our safety carabiner: 410kg
The pulling load of almost every dog is about 4 times its own body weight.
----
The chains are available in different widths and are powder-coated especially for you.
There's also a safety carabiner with a high breaking strength and safety lock. This original is only available from us, as we hold the patent for chains with this carabiner.
The chain collars are FCI standard and long-link. The short-link chains do NOT comply with the test.
----
Please only loop a leash next to the carabiner, never into the carabiner.
Please only use a leash if your furry friend is very good at walking on a leash and does not pull.
We're not saying this because the breaking load can't withstand it, but because with thin collars, the pressure can't be distributed evenly and over a wide area when pulled. This poses a risk of injury to the dog.
---
Suspension points
Due to the coating process, hanging points at the ends AND between the links are completely normal and unavoidable. Wherever there are contact points, no powder can penetrate, and therefore no paint can penetrate.
wear
Friction, whether between individual links or even from a leash, naturally causes wear. This is also completely normal and unavoidable. Depending on how intensively you use the chain, wear can occur more quickly.
Color indication for wear
Due to the different pigment composition of each color, metallic and neon colors wear off faster, especially between the links, than standard colors. This may also apply to very light standard colors. This is normal and unavoidable.
Care
Chain collars don't require intensive care. However, it's still worth cleaning your chain regularly with clean water, especially if a lot of dirt gets stuck between the links or after swimming in the sea. Additional dirt particles can lead to increased friction and therefore faster wear.
CARE INSTRUCTIONS
This collar does not require any special care. However, it should be rinsed regularly with water, especially if you have been in the sea. Salt or other dirt particles between the links can increase friction and cause faster wear. This means that a used look can be achieved more quickly.
CHAIN Halsband – Edelstahl. Echt. Ehrlich.
Kettenhalsband ist nicht gleich Kettenhalsband.
Viele nutzen einfachen Stahl – der kann rosten, sich verbiegen oder im schlimmsten Fall brechen.
Und trotzdem wird oft ein hoher Preis verlangt – für ein Produkt, das nicht hält, was es verspricht.
Beim CHAIN Halsband setzen wir auf das, was wirklich zählt: massiven, rostfreien Edelstahl.
Robust. Sicher. Langlebig.
Und weil wir bei Sicherheit keine halben Sachen machen, kommt unser CHAIN Halsband mit einem Sicherheitskarabiner aus Edelstahl.
Dieser lässt sich verschrauben – so kann er sich nicht versehentlich öffnen.
Normale Karabiner können bei falscher Nutzung aufspringen oder sich im schlimmsten Fall in den Hundehals bohren. Mit unserem System bist du auf der sicheren Seite.
⚠️ Wichtig zur Nutzung:
Das CHAIN Halsband ist kein Alltags-Halsband und nicht geeignet für Hunde, die an der Leine ziehen. Durch seine schmale, feste Form verteilt sich der Druck nicht wie bei einem breiten Leder- oder BIoThanehalsband.
Es ist ideal als stilvolles Accessoire oder perfekt für den Hundesport ( Nach FCI Standart und Prüfungskonform) oder für Hunde, die zu 110 % leinenführig sind.
💬 Was macht das CHAIN Halsband besonders?
🟡 Edelstahl statt einfachem Stahl
🟡 Höhere Bruchlast – belastbar & langlebig (mehr dazu im FAQ)
🟡 Rostfrei und unempfindlich gegenüber Nässe
🟡 Sicherheitskarabiner aus Edelstahl – schraubbar, nicht aufspringend
🟡 Glieder gleiten sanft durchs Fell – kein Ziepen, kein Knoten
🟡 Handverarbeitet – schlicht im Look, stark in der Wirkung
Bitte beachte die FAQ´s
🔔 Hinweis: Bei der Pulverbeschichtung können an Stellen wie zwischen den Gliedern kleine Farbpartikel fehlen. Dies beeinträchtigt die Funktion nicht und führt mit der Zeit zu einem leichten Used Look – dies ist normal.
This product is made especially for you, according to your wishes.
Processing time 2-4 weeks.
The power collars are made of high-quality stainless steel.
Breaking loads:
3mm short link: 280kg
3mm long link: 250kg
4mm long link: 600kg
Our safety carabiner: 410kg
The pulling load of almost every dog is about 4 times its own body weight.
----
The chains are available in different widths and are powder-coated especially for you.
There's also a safety carabiner with a high breaking strength and safety lock. This original is only available from us, as we hold the patent for chains with this carabiner.
The chain collars are FCI standard and long-link. The short-link chains do NOT comply with the test.
----
Please only loop a leash next to the carabiner, never into the carabiner.
Please only use a leash if your furry friend is very good at walking on a leash and does not pull.
We're not saying this because the breaking load can't withstand it, but because with thin collars, the pressure can't be distributed evenly and over a wide area when pulled. This poses a risk of injury to the dog.
---
Suspension points
Due to the coating process, hanging points at the ends AND between the links are completely normal and unavoidable. Wherever there are contact points, no powder can penetrate, and therefore no paint can penetrate.
wear
Friction, whether between individual links or even from a leash, naturally causes wear. This is also completely normal and unavoidable. Depending on how intensively you use the chain, wear can occur more quickly.
Color indication for wear
Due to the different pigment composition of each color, metallic and neon colors wear off faster, especially between the links, than standard colors. This may also apply to very light standard colors. This is normal and unavoidable.
Care
Chain collars don't require intensive care. However, it's still worth cleaning your chain regularly with clean water, especially if a lot of dirt gets stuck between the links or after swimming in the sea. Additional dirt particles can lead to increased friction and therefore faster wear.
The power collars are made of high-quality stainless steel.
Breaking loads:
3mm short link: 280kg
3mm long link: 250kg
4mm long link: 600kg
Our safety carabiner: 410kg
The pulling load of almost every dog is about 4 times its own body weight.
----
The chains are available in different widths and are powder-coated especially for you.
There's also a safety carabiner with a high breaking strength and safety lock. This original is only available from us, as we hold the patent for chains with this carabiner.
The chain collars are FCI standard and long-link. The short-link chains do NOT comply with the test.
----
Please only loop a leash next to the carabiner, never into the carabiner.
Please only use a leash if your furry friend is very good at walking on a leash and does not pull.
We're not saying this because the breaking load can't withstand it, but because with thin collars, the pressure can't be distributed evenly and over a wide area when pulled. This poses a risk of injury to the dog.
---
Suspension points
Due to the coating process, hanging points at the ends AND between the links are completely normal and unavoidable. Wherever there are contact points, no powder can penetrate, and therefore no paint can penetrate.
wear
Friction, whether between individual links or even from a leash, naturally causes wear. This is also completely normal and unavoidable. Depending on how intensively you use the chain, wear can occur more quickly.
Color indication for wear
Due to the different pigment composition of each color, metallic and neon colors wear off faster, especially between the links, than standard colors. This may also apply to very light standard colors. This is normal and unavoidable.
Care
Chain collars don't require intensive care. However, it's still worth cleaning your chain regularly with clean water, especially if a lot of dirt gets stuck between the links or after swimming in the sea. Additional dirt particles can lead to increased friction and therefore faster wear.
CARE INSTRUCTIONS
This collar does not require any special care. However, it should be rinsed regularly with water, especially if you have been in the sea. Salt or other dirt particles between the links can increase friction and cause faster wear. This means that a used look can be achieved more quickly.
FAQs
Conventional steel chains are often made of simple, unalloyed steel. This can rust , is less break-resistant , and is sensitive to moisture, friction, or skin contact.
We only use stainless steel – a high-quality, rust-proof steel that is significantly more resistant, hygienic and durable .
This makes a real difference, especially when it comes to dog accessories – in terms of safety, skin compatibility and durability.
If you order a chain from the Buy It Now option:
Yes, an exchange or return is possible as long as the item is unused and in its original condition . Please contact us in advance so we can discuss further details.
If you order a custom “CUSTOM” chain:
No, this necklace is made especially for you – in your desired length, color or color combination.
This is legally considered personalization , therefore returns or exchanges are not possible .
💡 If you are unsure about size, color or style, please write to us – we will help you before you order.
Depending on the design, our chains can withstand the following loads:
- 3 mm short-linked: up to 280 kg
- 3 mm long-linked: up to 250 kg
- 4 mm long-linked: up to 600 kg
- Safety carabiner (stainless steel): up to 410 kg
This means that even strong dogs can rely on this material – provided it is used correctly .
Yes, that's perfectly normal. Where friction occurs or where the links are hung , no powder coating can last .
Even with very high-quality paints and careful workmanship, this effect cannot be completely avoided – it is part of normal wear and tear on coated chains. However, the function remains unaffected.
No, that's normal too. There's always a minimal area of uncoated material on screw caps to ensure the thread can be turned correctly. We keep this area as small as possible—but it's technically impossible to completely avoid it.
Each powder coating consists of different particles.
Standard colors (especially dark tones such as black, gray, anthracite) are usually the most durable .
Metallic, glitter, neon, or pearl colors contain special effect pigments that are more sensitive to abrasion. This is not a quality defect, but rather a matter of the nature of these colors.
In short: the more unusual the color, the more sensitive the surface – but of course still of high quality.
Yes! Stainless steel is rustproof—so it's not a problem when exposed to water.
However, we recommend rinsing the collar with clean water after use, e.g. at the beach or lake, to remove dirt or sand.
This prevents additional friction and ensures that the coating stays beautiful for longer.
Animal welfare compliant:
Our chains are non-choking . They have a snap hook that prevents them from tightening – unlike traditional choke collars or even prong collars.
This means they are compatible with German animal protection law .
FCI/dog sport compliant:
For many dog sports or tests, chain collars are required , which must be long and single-linked – to ensure that no aids can be hidden .
Our CHAIN collars meet exactly these requirements.
💡 The snap hook is also allowed – according to the FCI there is no exclusion as long as the visibility of the neck is guaranteed.
→ Rinse it regularly with clean water, especially after exposure to sand, mud, or salt water. Dry it thoroughly and store it in a dry place. No care products are necessary for stainless steel – for coated versions, you can apply a little clear wax to maintain its shine.